Magnetic Rotary Encoder PCBs!

Sparkly purple packages in the mail always bring good things from Laen inside.  These are the magnetic encoder eval boards that I designed about a month ago.  As usual, the quality is great.  Unfortunately the timing is not ideal, since it’s crunch time at work, and I probably won’ t have time to build these up for a couple more weeks.  We’ll see, though – there aren’t a lot of parts on them, so maybe I’ll find a little bit of time sooner!

Related Posts

Project Frankenmill – Part 33, Claustrophobia

Final positions for the DIN rails and wire management have been nailed down. It’s much more tight than one should really wire a panel like this, but…

Project Frankenmill – Part 32, You’re Gonna Need a Bigger Boat

It seems to be a rule that no matter what size electronics enclosure you have, you will always have at least 10% more stuff that you need…

A Triumphant Return?

It may have been about a decade since my last blog update, but I’ve been plenty busy with cool projects this whole time. A recent burst of…

Camera Slider Track

I have long wanted to work on some motion-controlled camera rigs, for time lapse and moving video shot purposes.  The longest-brewing idea I have had is for…

AZIZ! Light!

In an earlier post back at the beginning of this month, I described the beginnings of my DIY microscope illuminator project, dubbed Project AZIZ.  At that point…

Diansu DS-982 Solder Paste Dispenser

I did a review, mini-teardown, and test of an imported pneumatic solder paste dispenser that I picked up on eBay. [youtube 9RdAL-ysBhA]

This Post Has 4 Comments

  1. Hello.
    I’m looking for magnetic rotary encoder with 10 bit, no case.
    the encoder needs to be incremental.

    Please send me data sheet with quote for 10 and 100 units.
    Thank you.

  2. Hello
    I’m interesting in Absolute Rotary Magnetic Encoder with 1024 lines.
    Please let me know the price for 10 and 100 units for the options you can suggest.
    waiting to hear from you.
    Guy Klap.

  3. so are these encoders for sale???i need this for a brushless gimbal for motor position as the gyro’s i use suffer from drift:(..
    this would be great…will this output in pwm? + ground and pwm signal …
    hope you can help as i cant seem to find any stock of this, also dont have the tools to make up the board so a ready to run,pcb,chip ready to go would be great….

  4. Hey. I’m from Poland. I would like to buy it from the Lord, ready PCB for AS5040 magnetic encoder about 10 pieces – published on the Lord’s side. If the purchase is possible please give the price and the bank details on my e-mail. Regards. Sorry for my bad English.

Leave a Reply

Your email address will not be published. Required fields are marked *