Leftovers from several CNC projects.
Related Posts
Project Frankenmill – Part 33, Claustrophobia
Final positions for the DIN rails and wire management have been nailed down. It’s much more tight than one should really wire a panel like this, but…
Project Frankenmill – Part 32, You’re Gonna Need a Bigger Boat
It seems to be a rule that no matter what size electronics enclosure you have, you will always have at least 10% more stuff that you need…
Project Frankenmill – Part 31, Full Pull
While I still haven’t gotten into the detail of squaring and tramming, I’ve been intensely curious to see if the new Z axis would be happier with…
Project Frankenmill – Alpha and Omega
Since 2009, I’ve been messing around with CNC machines. I started out with a small manual milling machine from Grizzly, and converted it to CNC using a…
Project Frankenmill – Part 30, Do You Even Lift Bro?
Hauled the column back down to the shop and mounted it back on the machine. Sure is a lot heavier than it used to be! Muscling things…
Project Frankenmill – Part 29, More Machining and Motion
Had some productive time in the shop during the holiday. First step was to make the counterbores for the M6 cap screws a bit deeper. Easy to…