So I don’t lose these links, here are some fancy advanced pendants that someone has implemented for EMC2, along with the underlying software necessary. I have already experimented a bit with hidcomp, trying out a USB gamepad to drive my mill around.
Final positions for the DIN rails and wire management have been nailed down. It’s much more tight than one should really wire a panel like this, but…
It seems to be a rule that no matter what size electronics enclosure you have, you will always have at least 10% more stuff that you need…
While I still haven’t gotten into the detail of squaring and tramming, I’ve been intensely curious to see if the new Z axis would be happier with…
Since 2009, I’ve been messing around with CNC machines. I started out with a small manual milling machine from Grizzly, and converted it to CNC using a…
Hauled the column back down to the shop and mounted it back on the machine. Sure is a lot heavier than it used to be! Muscling things…
Had some productive time in the shop during the holiday. First step was to make the counterbores for the M6 cap screws a bit deeper. Easy to…